Contact Us

Contact: Monica

Mob: +86-18261516116

Address: No.9 Xinda Road, Zhutang Town, Jiangyin City, Jiangsu Province, China

Home > Knowledge > Content
Installation and maintenance of the powder machine mixer
Nov 28, 2018

In the process of installation, the powder machine mixer needs to mechanically place it, then install the machine feet and level it. In this way, the machine can run freely. Before using the powder machine mixer, it is necessary to add oil to the fueling station, and then carry out no-load operation, check whether the fasteners are loose, whether the electrical is normal, whether the machinery is working normally, and if there is an abnormality, Renovation and commissioning.


The powder machine mixer needs to turn the feeding port to the top, open the feeding cover for feeding, the feeding amount of the equipment can not exceed its specified volume, then close the feeding cover, start the machine to run, if abnormality is found on the way, it must be stopped for inspection. After work or after changing the product, the inside and outside of the hopper must be rinsed clean.


The main purpose of the powder machine mixer is to mix a variety of different materials, and finally produce uniformly mixed materials. Reasonable use and maintenance can improve the working efficiency of the mixing machine and reduce unnecessary small hair.

Previous: Mixing action and operation procedure of powder blender machine

Next: Energy-saving effect and working principle of spice mixer machine