Contact Us

Contact: Monica

Mob: +86-18261516116

E-mail: Sales7@cnboly.com
Address: No.9 Xinda Road, Zhutang Town, Jiangyin City, Jiangsu Province, China

Home > Knowledge > Content
Introduction to the maintenance of the micro powder grinder mill
Oct 26, 2018

In the operation of the micro powder grinder mill, the bearing bears the entire load, so good lubrication must be guaranteed. This is because lubrication has a great relationship with the service life of the bearing. It directly affects the service life and operation rate of the machine. Therefore, the injected lubricant must be cleaned and the seal must be good.

 

During the use of the micronizer, it is necessary to maintain regular inspections because the newly installed tires are prone to loosening. Also note that the various parts of the machine are working properly during operation. Pay special attention to the degree of wear of the wear parts and always pay attention to replacing the worn parts. When placing the undercarriage plane of the movable device, dust and other debris should be removed in time to prevent the movable bearing from moving on the chassis when the machine encounters unbreakable materials, resulting in serious accidents.

 

If the bearing temperature rise is abnormal during the operation of the micro powder grinder mill, stop immediately to find out the cause and handle it in time. If there is impact sound when the rotating gear is running, it should be stopped and checked immediately and eliminated.

 

http://www.bolymill.com/

 


Previous: Installation and assembly requirements for centrifugal fans and blowers

Next: Characteristics and maintenance costs of small centrifugal blowers