Contact Us

Contact: Monica

Mob: +86-18261516116

Address: No.9 Xinda Road, Zhutang Town, Jiangyin City, Jiangsu Province, China

Home > Knowledge > Content
Maintenance of powdered sugar powder mill
Dec 17, 2018

The powdered sugar powder mill is an improved design based on the high-pressure mill. It is a high-efficiency milling equipment. The grinding device of the powdered sugar micro-powder mill adopts overlapping multi-stage sealing, which has good sealing performance, reduces the production process and improves the working efficiency. In use, users also need to pay attention to daily maintenance.


First of all, the powdered sugar powder mill needs to change the lubricating oil regularly. Usually, after 240 hours or one month of work, the lubricating oil should be replaced in time, and it should be replaced once every 1500~2000 hours. Secondly, the contact between the machine cavity and the material should be cleaned regularly. Also, the belt should be checked for tightness on a regular basis. If the belt is too loose, the belt should be adjusted by adjusting the bolt. In the middle position of the two belts, it is better to use the index finger to press about 10mm.


In addition, during the operation of the powdered sugar powder mill, the staff needs to check the bearing status frequently and pay close attention to the temperature rise. When the temperature rise exceeds 50 °C, the machine should be stopped for inspection, the cause is identified and the fault is eliminated.

Previous: Operation process and structural design of chili powder milling machine

Next: Main components and operating characteristics of electric wheat grinder