Contact Us

Contact: Monica

Mob: +86-18261516116

Address: No.9 Xinda Road, Zhutang Town, Jiangyin City, Jiangsu Province, China

Home > Knowledge > Content
Wheat crusher test requirements and good lubrication
Apr 20, 2018

During the operation of the wheat crusher, its shaft bears all the requirements of the negative machine. When it is used, its good lubrication will have a big bearing on the life of the bearing, and will directly affect the service life of the machine to some extent. And the operating rate, thus requiring the injected lubricating oil must be clean, the seal must be good.

Wheat crusher test requirements

1. The wheat crusher should be installed on a horizontal concrete foundation to a certain extent, mainly anchored by anchor bolts.

2. When installing, pay attention to the vertical of the main body and the horizontal.

3. Configure the power cord and control switch according to the power of the device.

4. Check whether there are any loose bolts and whether the main door is tight after installation.

The operator of the wheat crusher must be trained to achieve the “three understandings” and “four meetings”. After passing the training exam and obtaining the certificate, the driver must perform the job. With the face scraper conveyor driver, transport lane belt conveyor driver in close cooperation, unified signal contact, according to the order to open, stop open.

Previous: High-speed crushing and material utilization of micro pulverizer machine

Next: Dust Cleaning Device and System Control of Spice Grinding Machine