Contact Us

Contact: Monica

Mob: +86-18261516116

E-mail: Sales7@cnboly.com
Address: No.9 Xinda Road, Zhutang Town, Jiangyin City, Jiangsu Province, China

Detergent Powder Mixer Machine

Detergent Powder Mixer Machine

The Detergent Powder Mixer Machine consists of a U-shaped container, a ribbon mixing blade and a transmission component. The ribbon-like blades are generally made of two or three layers, and the outer spiral gathers the materials from the sides to the center,

Introduction

The Detergent Powder Mixer Machine consists of a U-shaped container, a ribbon mixing blade and a transmission component. The ribbon-like blades are generally made of two or three layers, and the outer spiral gathers the materials from the sides to the center, and the inner layer spiral conveys the materials from the center to the sides to form a convection mixture. The spiraling spiral belt is attached to the spindle and can push the material to travel in the direction of the spiral. The center of the bottom of the mixer horizontal cylinder is provided with a discharge port, and the spiral structure of the outer spiral belt cooperates with the rotation direction of the main shaft to drive the material inside the cylinder wall to the central discharge port to ensure that the material in the cylinder body has no dead angle.

29 工业洗涤剂粉浆搅拌机433.png

29 工业洗涤剂粉浆搅拌机435.png


Specification
●Volume: 100-20000L

●Designed for normal temperature and normal atmospheric pressure tator for center discharge

●Ribbon agitator for center discharge

●Manually operated or Pneumatic

●Hermetic seal or Packing Seal

●Safety limit switch on cleanout door

●Stainless Steel 304, Stainless Steel316L or Carbon Steel


Features

1. Horizontal cylinder: The cylinder adopts of horizontal structure, and there are a feeding inlet, observation hole, maintenance hole and material cleaning hole on the upper part of the cylinder.

2. Ploughshare shaft: The ploughshare shaft consists of a coulter, a coulter arm and a main shaft. The coulter arm is equipped with a coulter at one end and the other end is mounted on the main shaft. Adopt a Huff structure for easy assembly and disassembly.

3. Flying knife group: The flying knife shaft is equipped with several flying knives and the secondary motor directly connected. The auxiliary motor is installed in the cylinder to measure the high speed movement of the flying knives, so that the material is strongly diffused. In order to prevent dust from entering the bearing, the flying knife shaft adopts multiple sealing. structure.

4. Transmission part: The main motor and reducer transmit the shaft of the coulter group for circular motion.

5. Discharge valve: The discharge valve is installed at the bottom of the cylinder to control the material and discharge. The discharge valve can be divided into manual and pneumatic.

6. Liquid spraying device: The liquid discharging device is arranged on the upper part of the cylinder body, and is composed of a pipe member and a nozzle component, and is fixedly distributed on the cylinder body to uniformly distribute and spray.

7. Heating and heat preservation device: According to the process requirements, the jacket or coil can be used to heat the traffic, and the outside can be used as an insulation device.


Working Principle

Detergent powder mixer machine mixes the material inside the barrel with the inner and outer diameter spirals mounted on the stirring shaft. In the structure of the agitator, the spiral is designed to be internally and externally, and the left and right sides are opposite spirals. When the agitator is working, the mixer rotor is driven by the direct-coupled reducer. 

During the rotation process, the inner spiral drives the material near the shaft center to rotate the shaft, and the material is pushed from the inside to the sides along the axial direction. The outer spiral drives the material near the barrel wall to rotate the shaft, and pushes the material from the sides to the inside along the axial direction. Therefore, the material is convectively circulated in the barrel, sheared and mixed, and the material is quickly and uniformly mixed in a short time.


Food Mixer Machine Drawing

29 工业洗涤剂粉浆搅拌机1263.png


Selection Sets

●Different type of plough according to material characteristics

●Flap valve, butterfly valve, slide gate valve, ball valve

●Explosion-proof motors

●Controls such as variable frequency drives, motor starters and operator stations are available

●Spray nozzles for liquid introduction

●Sanitary type construction

●Jacket for heating or cooling

●Carbon Steel, Stainless Steel 304, Stainless Steel 316L


Packaging Details

1. Outside package: Standard export wooden cases.

2. Inner package: Stretch film.


Technical Data

Model

Main Structural Dimensions(mm)

Volume

Max loading

Speed

Machine weight

Total power

L1

L2

W1

W2

H1

H2

L

KG

Rpm/min

Kg

KW

JB-300

1675

1000

800

900

1100

100

300

180

85

560

5.5

JB-500

1950

1250

880

1100

1200

100

500

300

85

850

7.5

JB-1000

2404

1500

1100

1280

1400

100

1000

600

72

1300

11

JB-1500

3290

2000

1100

1385

1400

100

1500

900

63

1700

15

JB-2000

3290

2000

1330

1450

1520

100

2000

1200

63

2200

22

JB-3000

3290

2000

1530

1550

1720

100

3000

1800

63

3200

30

JB-4000

4300

2700

1530

1800

1850

100

4000

2400

56

4200

37

JB-6000

5000

3000

1750

2000

2050

100

6000

3500

56

5200

45

JB-8000

5300

3200

1950

2200

2300

100

8000

4500

48

6600

55

JB-10000

5800

3400

2150

2350

2500

100

10000

5500

48

7800

75



Hot Tags: detergent powder mixer machine, China, suppliers, manufacturers, factory, design, price, for sale, quotation, made in China
Inquiry