How to maintain a horizontal ribbon mixer

1. Daily maintenance
Cleaning: After each use, the residual materials inside and outside the mixer should be cleaned in time. You can use a soft brush or a damp cloth to wipe it. For stubborn stains, you can use an appropriate detergent, but avoid the detergent from entering the electrical components. Clean the feed and discharge ports regularly to prevent material blockage.
Inspection: Before starting the machine every day, check whether the various parts of the mixer are normal, such as whether the transmission device has abnormal noise, whether the agitator is loose, whether the seal is intact, etc. Check the electrical system, including whether the wires are damaged, whether the plug is loose, whether the switch is sensitive, etc.

2. Regular maintenance
Lubrication: Lubricate the transmission device of the mixer regularly, such as the reducer, bearings, etc. Select the appropriate lubricant according to the equipment manual, and add it according to the prescribed time and method. Pay attention to the amount of lubricant used, too much or too little may affect the performance of the equipment.
Tightening: Regularly check the various connection parts of the mixer, such as bolts, nuts, etc., to ensure that they are fastened and reliable. If there is any looseness, tighten it in time. Check the blades and shaft of the agitator to ensure that they are firmly connected. If they are worn or deformed, they should be replaced in time.
Seal inspection: Regularly check the seals of the mixer, such as sealing rings, gaskets, etc., to ensure that they have good sealing performance. If they are damaged or aged, they should be replaced in time. Check the gap between the barrel and the agitator. If there is a large gap, it should be adjusted in time to ensure the sealing effect.
Electrical maintenance: Regularly check the grounding of the electrical system to ensure good grounding and prevent electric shock accidents.
Perform regular maintenance on the motor, such as cleaning the surface of the motor, checking the insulation performance of the motor, etc. If there is any abnormality, it should be repaired or replaced in time.

3. Precautions
Operation specifications: Strictly follow the operating procedures of the equipment to avoid overload operation and incorrect operation. Before starting the mixer, ensure that the feed and discharge ports are closed to prevent material splashing.
Safety protection: When performing maintenance and maintenance, the power supply should be cut off first, and warning signs should be hung to prevent others from operating incorrectly. Operators should wear appropriate protective equipment, such as gloves, safety helmets, etc.
Storage environment: When the mixer is not used for a long time, it should be stored in a dry, ventilated place, away from direct sunlight and humid environment. The equipment can be covered with plastic cloth or dust cover to prevent dust and debris from entering.

Good maintenance and care of horizontal ribbon mixers can extend its service life and ensure stable performance. If you are interested in the maintenance of horizontal ribbon mixers, we sincerely invite you to visit our website www.bolymill.com! Here you can find rich product information, industry-leading technical trends and professional customer service.

https://www.bolymill.com/