How much do you know about the traditional Chinese medicine grinder?

Jan 24, 2022

The traditional Chinese medicine pulverizer is made of 304 stainless steel precision casting, which can quickly pulverize various soft and hard medicinal materials and other materials, mainly including Ganoderma lucidum, American ginseng, Tiefengdou, Panax notoginseng, pearls, stem grasses, ores, whole grains, malt Cards, dried herbs, etc. (except oily, wet, sticky materials).

Working principle: The material enters the crushing chamber through the feeding hopper and the feeding port, and is firstly crushed in the first crushing chamber by the relative movement between the rotating toothed disc and the stationary toothed disc, and the primary crushed material passes through the rotating disc. The upper discharge hole is discharged into the second pulverizing cavity (outer pulverizing cavity), and there is a high-speed rotating hammer in the outer pulverizing cavity. , Under the action of rubbing, the material is crushed, and the crushed material is discharged into the collection bag (or box) through the screen under the action of centrifugal force.

Structure: The pulverizer is mainly composed of base, motor, casing, control system, pulverizing system, pulverizing cavity cover, feeding head, and collecting bag (or box).

Water-cooled traditional Chinese medicine pulverizer (on the basis of ordinary models with water circulation cooling system)

1. Technical points
This machine is made of high-quality 304 stainless steel. It adopts grading and crushing technology. Continuous feeding, no crushing residue, crushing cavity and bearing seat are equipped with water cooling device, most of the heat generated during work is taken away through circulating water flow, avoiding the impact of high temperature on the machine and processing materials, retaining the original properties of the material, extending The working time of the machine protects the normal operation of the bearing and improves the service life of the whole machine. This machine adopts pure copper motor, which is powerful and powerful. It has a good crushing effect on Chinese medicinal materials with high hardness and fibers, which can greatly improve the production efficiency.

2. Operation process
1. Check the machine and the crushing chamber for loose screws and whether the screen meets the requirements. Check if the micro switch is activated.
2. Check whether the water pipe joints are tightened and whether there is water leakage after passing the water.
3. Put on the receiving bag,
4. Turn on the power supply, press the green button to start normally, the pointer of the ammeter shows normal, after idling for a while, the production can be fed. When feeding, pay attention to the uniform speed, and do not allow the machine to run overloaded for a long time. After the processing is completed, press the red button to turn off the power and pour out the crushed materials.

3. Maintenance matters
1. Bearings should be cleaned and refueled regularly;
2. When the hammer head is worn and needs to be replaced, the whole set of hammer heads should be replaced uniformly to avoid vibration caused by imbalance;
3. If the machine is not used for a long time, it should be cleaned and stored in a well-ventilated place indoors;

Note: (both models require attention)
1. The size of the block material to be directly input cannot be larger than 40 mm. If the crushed material is too hard, be sure to use the ordinary coarse mesh screen to crush it first, and then replace the laser mesh for the second crushing.
2. Screen installation method: Since the thickness of the laser punched screen is very thin, be sure to place the screen support frame under the screen when installing the screen!


https://www.bolymill.com/

You Might Also Like