How to operate a crusher

Feb 07, 2024

1. Preparation: Wear safety equipment such as gloves, goggles and earplugs, and make sure there is no debris around.

2. Prepare materials: Prepare the materials to be crushed, and make sure there is no hard material such as metal or glass mixed in.

3. Turn on the crusher: Turn on the crusher according to the instructions or labels, and make sure the power supply is connected correctly.

4. Put materials: Put the materials to be crushed gradually into the feed port of the crusher, and avoid putting too much at one time to avoid blockage.

5. Start the crusher: Start the crusher and adjust the speed or time as needed.

6. Monitor the operation: During the operation, observe the crushing effect to ensure that the materials are crushed evenly.

7. Stop the crusher: When the crushing is completed, turn off the crusher and wait for it to stop completely.

8. Cleaning work: Clean the crusher, including removing residual materials and maintaining the equipment.

9. Storage equipment: Store the crusher in a dry and ventilated place, away from direct sunlight and humid environment.

https://www.bolymill.com/

You Might Also Like