Storage information of ultrafine grinder

1. Often check the tightening condition of each component to avoid loosening and damaging the equipment.
2. The oil inlet should be often fed with oil, and the rolling bearing position should be cleaned and filled with grease for half a year.
3. When working off, the equipment should be at a high speed for a period of time, and the tail material in the machine should be blown and then standby.
4, when the equipment stops using, the main engine dirt should be eliminated, the whole rotating position should be filled with lubricating grease, and the storage should be placed in the warehouse of dry and corrosion-resistant vapor body.

https://www.bolymill.com/