Analysis of the cause of the strong vibration of the pulverizer

Dec 20, 2021

Spindle bending deformation: the solution is to straighten or replace.

The bottom corner fixing nut is not fixed tightly or loosened during operation: the solution is to tighten it.

The weight of other parts on the rotor is unbalanced. At this time, you need to carefully check and adjust the balance.

The bearing clearance exceeds the limit or is damaged. Generally, the problem can be solved by replacing the new bearing.

Individual hammers are stuck too tightly and are not thrown off during operation. You can wait until the pulverizer is shut down and turn it by hand for observation, and find a way to make the hammer rotate flexibly.

Corresponding to the difference between the weight of the two sets of hammers is more than 5 grams. The elimination method is to adjust the weight of the hammer, and the Beijing cloud host makes the difference between the weights of the corresponding two groups less than 5 grams.

The hammer is installed incorrectly in the overhaul and assembly. In order to prevent the weight of the rotor from losing balance when the hammers of the video optical transceiver are used, all the hammers in the shredder must be changed and turned together, otherwise strong vibration will occur during operation.


https://www.bolymill.com/


You Might Also Like