Replacement and installation skills of grinder screen

The shredder is a scrap metal processing equipment with a high utilization rate on the market, which can crush all kinds of scrap metal. There are vulnerable parts in the crusher to protect the vulnerable parts from damage or less damage. Placing the crusher can cause equipment damage due to accidental failures, which can greatly reduce the volume of chips. It has the advantages of large crushing ratio, high production efficiency, average discharge particle size, and controllability.

The screen in the crusher is a vulnerable part that is frequently replaced. How should the customer choose the screen when replacing the crusher screen? How to choose the quality of the screen and the hole diameter of the screen? What impact will the selection of screens with different thicknesses and different apertures have on the performance of the equipment? Of course, the role of the screen is not only to control the particle size of the finished product, but also to block the material in the crusher. When the material in the crusher is not crushed to a certain particle size, it will be blocked by the screen. , Will not be discharged from the discharge port, will continue to stay in the crusher and be torn and crushed by the high-speed rotating cutter head, until it reaches the size of the screen mesh hole diameter, it will be automatically discharged from the discharge port.

The steps for us to replace the screen should be to first open the upper cover of the crusher, and pull out the original screen or the broken screen, and then we will install it correctly according to the original direction or instructions, and the screen is installed. , Check whether the card housing on the screen is tight, and whether the screens on both sides of the card housing are neat. After installation, be sure to close the machine cover and tighten the screws.

https://www.bolymill.com/