Technical characteristics of screw feeder

The lubrication of the reducer of the feeder is carried out according to the instruction manual of the reducer. A good feeder has a strong and compact overall structure, exquisite and beautiful; it can discharge materials downstream evenly and continuously according to the requirements of the conveying system.

The screw feeder equipment can run continuously and stably, and is small and low noise. Easy to operate and maintain. Choose the appropriate material according to the medium that needs to be transported, and then select the appropriate specification and model according to the amount of material to be transported and the inlet and outlet diameter of the transport pipeline to compare with the samples of the manufacturer. During the application of the discharge valve, the inner bearing of the left seat should be lubricated with grease. Grease is: high temperature resistant lithium molybdenum disulfide grease. The replacement period is: under normal operation, it should be replaced every 4~5 months, and under high temperature, it should be 2~3 months. Frequent maintenance and overhaul of the feeder is an important means to prolong the service life of the machine and ensure normal operation. For lubrication, pay attention to the following points: This machine adopts thin oil splash lubrication, and the lubricating oil should be determined according to the place of use and temperature conditions.

https://www.bolymill.com/