Main features of powder sieving machine and applicable industry
May 24, 2019
The powder sieving machine is a high-precision fine-grain screening equipment. Based on the absorption of advanced technology at home and abroad, our company has designed a machine with advanced domestic level, with a maximum screening of 500 mesh. The machine makes a three-dimensional motion by the up and down exciting force of the vibration motor, forcing the material to spiral forward and finally discharged from the discharge port.
The powder screening machine is a common motor from the base. The rubber coupling is used to drive the exciter. The upper and lower ends of the exciter are equipped with eccentric weights to change the rotary motion of the motor into vertical, horizontal and inclined three-dimensional motion. Then, the motion is transmitted to the screen surface, and the phase angle of the eccentric weight of the upper and lower ends is adjusted to change the movement track of the material on the screen surface.
Main features of powder screening machine
1. High efficiency, exquisite design and durability. Any powder and mucus can be screened.
2. Easy to change screen, easy to operate and easy to clean.
3. The mesh is not blocked, the powder is not flying, and it can be sieved to 500 mesh or 0.028 mm.
4. Impurities and coarse materials are automatically discharged and can be operated continuously.
5. Unique grid design, the screen is used for a long time, and it takes only 3-5 minutes to change the screen.
6. Small size, easy to move without space.
7. The sieve machine can reach up to five layers. It is recommended to use three layers.
The main applicable industry for powder screening machines
1. Pollution treatment categories: wastewater, waste oil, excrement, dyeing and finishing wastewater, additives, activated carbon, etc.
2. Medicines: Chinese medicine powder, western medicine powder, pharmaceutical raw material powder, etc.
3. Metallurgy: lead powder, zinc oxide, titanium oxide, foundry sand, diamond powder, aluminum powder, iron powder, various metal powders, etc.
4. Chemicals: Resins, paints, pigments, rubber, carbon black, activated carbon, cosolvents, gums, Yuanming powder, polyethylene powder, quartz sand, etc.
5. Kiln industry: glass, ceramics, porcelain mud, abrasive materials, refractory bricks, kaolin lime, mica, alumina, calcium carbonate (heavy) and so on.
http://www.bolymill.com
