Contact Us

Contact: Monica

Mob: +86-18261516116

Address: No.9 Xinda Road, Zhutang Town, Jiangyin City, Jiangsu Province, China

Home > Knowledge > Content
Mixing action and operation procedure of powder blender machine
Nov 30, 2018

The powder blender machine requires uniform distribution of all the materials involved in the mixing, and the degree of mixing can be divided into three states: ideal mixing, random mixing and completely unmixed. The degree of mixing of the various materials in the mixing machine depends on factors such as the proportion of the material to be mixed, the physical state and characteristics, and the type of mixing machine used and the duration of the mixing operation.


Under the action of the blade, the powder blender machine has both circular motion and axial motion. According to the motion state of the material, convection stirring, shear stirring and diffusion stirring are generated. According to the mortar, it is necessary to add about 10 mm. Polystyrene fiber, which is not easy to disperse when stirring, we installed a set of flying knives to disperse the agglomerated fibers by high-speed rotation to achieve the desired effect.


powder blender machine operating procedures

1. Turn on the power. Wipe the mixing pot and the mixing blade with a damp cloth before mixing.

2. Pour the weighed cement and standard sand into the mixing pot.

3. Start the machine, add water after mixing for 5s, and add it in 20s-30s.

4. Start the machine and stir it for 180±5s.

5. Scrape the rubber sand stuck on the blade and remove the stirring pot.

Previous: Heating system and packaging requirements for fertilizer granulator machine

Next: Installation and maintenance of the powder machine mixer