What if the mixer becomes clogged

It is a common fault that the cone mixer is blocked, and you don't have to panic when you encounter it. You can solve it by mastering the basic knowledge points. Generally, the main reason is roughly that when the mixer is working, the feeding speed of the machine is too fast, and the speed of the motor cannot keep up. Reasonable material transfer should be carried out according to the processing efficiency of the machine; another reason is that the blades are worn too much, or The phenomenon of knife breakage also leads to insufficient mixing and blockage during machine operation.

Understand the general reason. When using the mixer, pay attention to the reading of the ammeter. When the reading is too large, reduce the feeding speed. If the reading of the ammeter still does not drop, it is necessary to turn off the motor and check the use of the blade. situation. Increased productivity and enhanced safety can only be achieved when blockages are resolved.

https://www.bolymill.com/